Repair / Calibration Service
With a calibration from DEPRAG you can always be sure that your measurement equipment provides reliable measurement results – competent and with the requisite traceability to national norms. DEPRAG has an accredited calibration laboratory where various calibration methods can be employed to calibrate with traceability and the lowest measurement uncertainty, covering torques of between 0.01 Nm and 500 Nm.
How long is the calibration valid?
In principle a calibration is only valid at the time it is conducted. It is normally the responsibility of the user to decide on the length of calibration intervals. The application, i.e. the conditions of the workplace, method of usage of the measurement tool, frequency of use and safety concerns for the workpieces to be assembled are all considerations when determining calibration intervals.
If a measurement tool is used in a running assembly process, it makes more sense to have shorter calibration intervals than if a measurement tool is only used infrequently in a laboratory setting.
Verification cycles could then perhaps take place every 3 months or 3 years.
We recommend recalibrating our measurement system at least once a year.
