The screw dispenser is the cost-effective entry to automating your production.
You are looking for a quick solution to automate your assembly, but an automatic screw feeder is not feasible due to the low number of screws to be processed. For this, the DEPRAG screw presenter or screw dispenser is the ideal solution.
Screw presenters are ideal for the automatic presentation of screws, allowing them to be picked up with a manual or fixed screwdriver.
With a screw dispenser, screws are removed manually.
Our engineers will be happy to help you select the right presenter or screw dispenser for your assembly task. Contact us today and start your consultation.
Product information – Screw presenters for hand-held and stationary screwdrivers
Screw presenters for hand-held screwdrivers
for processing screws with a shaft diameter of 1 mm to 5 mm and a shaft length of max. 25 mm.
The screw is picked up by means of a magnetic bit or vacuum suction.
An operator can comfortably lift the screw with a forward movement.
Screw presenter for stationary screwdriver
for processing screws with a shaft diameter of 1.4 mm to 5 mm and a shaft length of max. 18 mm
This screw presenter is particularly suitable for countersunk screws.
A screw separator sorts and presents each individual screw in a pick-up position. The screw is removed in an upward motion. A signal output allows control of the pick-up position by a host controller.
Product Information – Screw Dispenser
The screw dispenser is optimized for use in manual workstations. It dispenses screws with a maximum head diameter of 12 mm and a length of 30 mm (small version) or 60 mm (large version).
Functionality of the screw dispenser:
- The screws are injected from the feed system into the dispenser container.
- The operator inserts his hand into the extraction zone; an optical sensor detects the hand and activates the opening of a slide.
- The screws fall out of the container into the operator’s hand.
